Merge pull request '修复标定信息读取问题' (#10) from cfy-feat-fix into main

Reviewed-on: #10

client.go

@@ -793,7 +793,7 @@ func (mc *ModbusClient) WriteRegisterWithRes(addr uint16, value uint16) (bytes [
 	req.payload = append(req.payload, uint16ToBytes(mc.endianness, value)...)
 
 	// run the request across the transport and wait for a response
-	res, err = mc.executeRequest(req)
+	res, err = mc.executeRequestWithRes(req)
 	if err != nil {
 		return
 	}
@@ -801,17 +801,27 @@ func (mc *ModbusClient) WriteRegisterWithRes(addr uint16, value uint16) (bytes [
 	// validate the response code
 	switch {
 	case res.functionCode == req.functionCode:
-		// expect 4 bytes (2 byte of address + 2 bytes of value)
-		if len(res.payload) != 4 ||
+		// expect at least 4 bytes (2 byte of address + 2 bytes of value)
+		// 后面可能还有自定义数据
+		if len(res.payload) < 4 {
+			err = ErrProtocolError
+			return
+		}
+
 		// bytes 1-2 should be the register address
-			bytesToUint16(BIG_ENDIAN, res.payload[0:2]) != addr ||
+		if bytesToUint16(BIG_ENDIAN, res.payload[0:2]) != addr ||
 			// bytes 3-4 should be the value
 			bytesToUint16(mc.endianness, res.payload[2:4]) != value {
 			err = ErrProtocolError
 			return
 		}
 
-		bytes = req.payload[1:]
+		// 返回自定义数据（第4字节之后的数据）
+		if len(res.payload) > 4 {
+			bytes = res.payload[4:]
+		} else {
+			bytes = []byte{} // 没有自定义数据，返回空切片
+		}
 
 	case res.functionCode == (req.functionCode | 0x80):
 		if len(res.payload) != 1 {
@@ -1188,15 +1198,9 @@ func (mc *ModbusClient) readRegistersWithFunctionCode(addr uint16, quantity uint
 		unitId: mc.unitId,
 	}
 
-	// if functionCode != fcCustomize {
-	// 	err = ErrUnexpectedParameters
-	// 	mc.logger.Errorf("unexpected function code (%d)", functionCode)
-	// 	return
-	// }
-
-	if functionCode == 0 {
+	if functionCode != fcCustomize {
 		err = ErrUnexpectedParameters
-		mc.logger.Errorf("unexpected register type (%v)", functionCode)
+		mc.logger.Errorf("unexpected function code (%d)", functionCode)
 		return
 	}
 
@@ -1208,9 +1212,10 @@ func (mc *ModbusClient) readRegistersWithFunctionCode(addr uint16, quantity uint
 		return
 	}
 
-	if quantity > 1024 {
+	// 16 * 16 * 40
+	if quantity > 10240 {
 		err = ErrUnexpectedParameters
-		mc.logger.Error("quantity of registers exceeds 1024")
+		mc.logger.Error("quantity of registers exceeds 10240")
 		return
 	}
 
@@ -1232,24 +1237,89 @@ func (mc *ModbusClient) readRegistersWithFunctionCode(addr uint16, quantity uint
 	}
 
 	// validate the response code
+	// switch {
+	// case res.functionCode == req.functionCode:
+	// 	// make sure the payload length is what we expect
+	// 	// (1 byte of length + 2 bytes per register)
+	// 	if len(res.payload) != 1+2*int(quantity) {
+	// 		err = ErrProtocolError
+	// 		return
+	// 	}
+
+	// 	// validate the byte count field
+	// 	// (2 bytes per register * number of registers)
+	// 	if uint(res.payload[0]) != 2*uint(quantity) {
+	// 		err = ErrProtocolError
+	// 		return
+	// 	}
+
+	// 	// remove the byte count field from the returned slice
+	// 	bytes = res.payload[1:]
+
+	// case res.functionCode == (req.functionCode | 0x80):
+	// 	if len(res.payload) != 1 {
+	// 		err = ErrProtocolError
+	// 		return
+	// 	}
+
+	// 	err = mapExceptionCodeToError(res.payload[0])
+
+	// default:
+	// 	err = ErrProtocolError
+	// 	mc.logger.Warningf("unexpected response code (%v)", res.functionCode)
+	// }
+
 	switch {
 	case res.functionCode == req.functionCode:
-		// make sure the payload length is what we expect
-		// (1 byte of length + 2 bytes per register)
-		if len(res.payload) != 1+2*int(quantity) {
+		// For custom function code 0x41, the payload format is:
+		// [起始地址(2字节)] [字节数(2字节)] [数据...]
+		if functionCode == fcCustomize {
+			// validate minimum payload length (start address 2 bytes + byte count 2 bytes)
+			if len(res.payload) < 4 {
 				err = ErrProtocolError
+				mc.logger.Errorf("payload too short for custom function code: %d bytes", len(res.payload))
 				return
 			}
 
+			// extract byte count from payload (bytes 2-3, big endian)
+			byteCount := bytesToUint16(BIG_ENDIAN, res.payload[2:4])
+
+			// validate payload length matches expected data length
+			expectedLength := 4 + int(byteCount) // start address (2) + byte count (2) + data
+			if len(res.payload) != expectedLength {
+				err = ErrProtocolError
+				mc.logger.Errorf("payload length mismatch: expected %d, got %d", expectedLength, len(res.payload))
+				return
+			}
+
+			// validate byte count matches requested quantity
+			if byteCount != 2*quantity {
+				err = ErrProtocolError
+				mc.logger.Errorf("byte count mismatch: expected %d, got %d", 2*quantity, byteCount)
+				return
+			}
+
+			// extract only the data part (skip start address and byte count)
+			bytes = res.payload[4:]
+		} else {
+			// standard modbus protocol handling
+			// make sure the payload length is what we expect
+			// (1 byte of length + 2 bytes per register)
+			// if len(res.payload) != 1+2*int(quantity) {
+			// 	err = ErrProtocolError
+			// 	return
+			// }
+
 			// validate the byte count field
 			// (2 bytes per register * number of registers)
-		if uint(res.payload[0]) != 2*uint(quantity) {
-			err = ErrProtocolError
-			return
-		}
+			// if uint(res.payload[0]) != 2*uint(quantity) {
+			// 	err = ErrProtocolError
+			// 	return
+			// }
 
 			// remove the byte count field from the returned slice
 			bytes = res.payload[1:]
+		}
 
 	case res.functionCode == (req.functionCode | 0x80):
 		if len(res.payload) != 1 {
@@ -1374,3 +1444,29 @@ func (mc *ModbusClient) executeRequest(req *pdu) (res *pdu, err error) {
 
 	return
 }
+
+func (mc *ModbusClient) executeRequestWithRes(req *pdu) (res *pdu, err error) {
+	// send the request over the wire, wait for and decode the response
+	res, err = mc.transport.ExecuteRequestWithRes(req)
+	if err != nil {
+		// map i/o timeouts to ErrRequestTimedOut
+		if os.IsTimeout(err) {
+			err = ErrRequestTimedOut
+		}
+		return
+	}
+
+	// make sure the source unit id matches that of the request
+	if (res.functionCode&0x80) == 0x00 && res.unitId != req.unitId {
+		err = ErrBadUnitId
+		return
+	}
+	// accept errors from gateway devices (using special unit id #255)
+	if (res.functionCode&0x80) == 0x80 &&
+		(res.unitId != req.unitId && res.unitId != 0xff) {
+		err = ErrBadUnitId
+		return
+	}
+
+	return
+}

modbus.go

@@ -41,7 +41,7 @@ const (
 	fcWriteFileRecord uint8 = 0x15
 
 	// customize
-	fcCustomize uint8 = 0x29
+	fcCustomize uint8 = 0x41
 
 	// exception codes
 	exIllegalFunction         uint8 = 0x01

rtu_transport.go

@@ -4,6 +4,7 @@ import (
 	"fmt"
 	"io"
 	"log"
+	"os"
 	"time"
 )
 
@@ -21,10 +22,10 @@ type rtuTransport struct {
 }
 
 type rtuLink interface {
-	Close()		(error)
+	Close() error
 	Read([]byte) (int, error)
 	Write([]byte) (int, error)
-	SetDeadline(time.Time)	(error)
+	SetDeadline(time.Time) error
 }
 
 // Returns a new RTU transport.
@@ -80,6 +81,7 @@ func (rt *rtuTransport) ExecuteRequest(req *pdu) (res *pdu, err error) {
 	// send the final ADU+CRC on the wire
 	n, err = rt.link.Write(rt.assembleRTUFrame(req))
 	if err != nil {
+		fmt.Printf("write error: %s", err.Error())
 		return
 	}
 
@@ -109,6 +111,59 @@ func (rt *rtuTransport) ExecuteRequest(req *pdu) (res *pdu, err error) {
 	return
 }
 
+func (rt *rtuTransport) ExecuteRequestWithRes(req *pdu) (res *pdu, err error) {
+	var ts time.Time
+	var t time.Duration
+	var n int
+
+	// set an i/o deadline on the link
+	err = rt.link.SetDeadline(time.Now().Add(rt.timeout))
+	if err != nil {
+		return
+	}
+
+	// if the line was active less than 3.5 char times ago,
+	// let t3.5 expire before transmitting
+	t = time.Since(rt.lastActivity.Add(rt.t35))
+	if t < 0 {
+		time.Sleep(t * (-1))
+	}
+
+	ts = time.Now()
+
+	// build an RTU ADU out of the request object and
+	// send the final ADU+CRC on the wire
+	n, err = rt.link.Write(rt.assembleRTUFrame(req))
+	if err != nil {
+		return
+	}
+
+	// estimate how long the serial line was busy for.
+	// note that on most platforms, Write() will be buffered and return
+	// immediately rather than block until the buffer is drained
+	rt.lastActivity = ts.Add(time.Duration(n) * rt.t1)
+
+	// observe inter-frame delays
+	time.Sleep(rt.lastActivity.Add(rt.t35).Sub(time.Now()))
+
+	// read the response back from the wire
+	res, err = rt.readRTUFrameWithRes()
+
+	if err == ErrBadCRC || err == ErrProtocolError || err == ErrShortFrame {
+		// wait for and flush any data coming off the link to allow
+		// devices to re-sync
+		time.Sleep(time.Duration(maxRTUFrameLength) * rt.t1)
+		discard(rt.link)
+	}
+
+	// mark the time if we heard anything back
+	if err != ErrRequestTimedOut {
+		rt.lastActivity = time.Now()
+	}
+
+	return
+}
+
 // Reads a request from the rtu link.
 func (rt *rtuTransport) ReadRequest() (req *pdu, err error) {
 	// reading requests from RTU links is currently unsupported
@@ -133,15 +188,234 @@ func (rt *rtuTransport) WriteResponse(res *pdu) (err error) {
 	return
 }
 
+func calculateModbusCRC16(data []byte) uint16 {
+	// 初始值 (标准 Modbus RTU)
+	var crc uint16 = 0xFFFF
+
+	// 遍历所有需要校验的字节
+	for _, b := range data {
+		// 1. 当前 CRC 异或当前字节 (注意：字节 b 转换为 uint16)
+		crc = crc ^ uint16(b)
+
+		// 2. 8 次迭代进行位运算
+		for i := 0; i < 8; i++ {
+			// 检查最低有效位 (LSB)
+			if crc&0x0001 != 0 {
+				// 如果 LSB 是 1: 右移一位，然后异或多项式 0xA001
+				// 0xA001 是 0x8005 反射后的结果
+				crc = (crc >> 1) ^ 0xA001
+			} else {
+				// 如果 LSB 是 0: 直接右移一位
+				crc = crc >> 1
+			}
+		}
+	}
+
+	// 3. 返回最终的 CRC 值
+	return crc
+}
+
+// 示例用法：使用此函数替换您原来的 crc.add/crc.value 逻辑
+
+// 假设您的数据帧已完整接收到 rxbuf 中
+func checkCRC(rxbuf []byte, totalFrameSize int) bool {
+	// 1. 确定校验范围 (地址到数据结束)
+	crcEndIndex := totalFrameSize - 2
+	dataToVerify := rxbuf[0:crcEndIndex]
+
+	// 2. 使用模拟从机的函数计算 CRC
+	calculatedCRC := calculateModbusCRC16(dataToVerify)
+
+	// 3. 提取接收到的 CRC (Little-Endian 顺序)
+	recvCRCLow := rxbuf[crcEndIndex]
+	recvCRCHigh := rxbuf[crcEndIndex+1]
+
+	// 4. 重组接收到的 CRC
+	receivedCRC := (uint16(recvCRCHigh) << 8) | uint16(recvCRCLow)
+
+	// 5. 比较
+	return calculatedCRC == receivedCRC
+}
+
 // Waits for, reads and decodes a frame from the rtu link.
 func (rt *rtuTransport) readRTUFrame() (res *pdu, err error) {
 	var rxbuf []byte
 	var byteCount int
 	var bytesNeeded int
 	var crc crc
+	// var dataLength uint16
 
 	rxbuf = make([]byte, maxRTUFrameLength)
 
+	// read the serial ADU header: unit id (1 byte), function code (1 byte) and
+	// PDU length/exception code (1 byte)
+	byteCount, err = io.ReadFull(rt.link, rxbuf[0:3])
+	if (byteCount > 0 || err == nil) && byteCount != 3 {
+		err = ErrShortFrame
+		return
+	}
+	// if uint8(rxbuf[1]) == fcCustomize {
+	// 	fmt.Printf("receive: %v\n", rxbuf[0:3])
+	// }
+	if err != nil && err != io.ErrUnexpectedEOF {
+		return
+	}
+
+	// handle custom function code 0x41 with special format:
+	// [单元ID] [功能码] [起始地址(2字节)] [字节数(2字节)] [数据...] [CRC]
+	if uint8(rxbuf[1]) == fcCustomize {
+		// 1. 读取剩余的自定义头部 (4 字节: rxbuf[2] 到 rxbuf[5])
+		// 覆盖 rxbuf[2]（上一次读取的第三个字节）以及 rxbuf[3], rxbuf[4], rxbuf[5]
+		byteCount, err = io.ReadFull(rt.link, rxbuf[3:6]) // <-- 关键修正：从索引 2 开始读取 4 字节
+
+		// 修正短帧检查逻辑
+		if err != nil {
+			if err == io.EOF || err == io.ErrUnexpectedEOF {
+				err = ErrShortFrame
+			}
+			return
+		}
+		// 此时 byteCount 应该总是 4。
+
+		// 2. 提取数据长度 (关键修正点)
+		// 数据长度位于 rxbuf[4] 和 rxbuf[5]
+		dataLength := bytesToUint16(BIG_ENDIAN, rxbuf[4:6])
+		bytesNeeded = int(dataLength)
+
+		// 3. 计算总共需要读取的字节数
+		// 数据域长度 + 2 字节 CRC
+		bytesToRead := bytesNeeded + 2
+
+		// 4. 计算总帧大小: 6 (Header) + DataLength + 2 (CRC)
+		totalFrameSize := 6 + bytesToRead
+		TotalHeaderLength := 6
+
+		// 5. 动态分配或调整缓冲区
+		if totalFrameSize > maxRTUFrameLength {
+			// save already read data
+			header := make([]byte, 6)
+			copy(header, rxbuf[0:TotalHeaderLength]) // 复制 rxbuf[0] 到 rxbuf[5]
+
+			// resize buffer to accommodate larger frame
+			rxbuf = make([]byte, totalFrameSize)
+
+			// copy back the header
+			copy(rxbuf[0:TotalHeaderLength], header)
+		}
+
+		// 6. 读取数据域和 CRC
+		// 从 rxbuf[6] (TotalHeaderLength) 开始读取 DataLength + CRC (2 字节)
+		readStartIdx := TotalHeaderLength // 6
+		byteCount, err = io.ReadFull(rt.link, rxbuf[readStartIdx:totalFrameSize])
+
+		if err != nil {
+			if err == io.EOF || err == io.ErrUnexpectedEOF {
+				err = ErrShortFrame
+			}
+			return
+		}
+
+		if byteCount != bytesToRead {
+			rt.logger.Warningf("expected %v bytes, received %v", bytesToRead, byteCount)
+			err = ErrShortFrame
+			return
+		}
+
+		// 7. CRC 校验
+		crcEndIndex := totalFrameSize - 2 // CRC 校验范围的结束索引 (不包含)
+
+		// if checkCRC(rxbuf, totalFrameSize) {
+		// 	fmt.Println("66666666666666")
+		// }
+
+		crc.init()
+		crc.add(rxbuf[0:crcEndIndex]) // 校验范围从 rxbuf[0] 到数据域结束
+
+		// 比较接收到的 CRC
+		sentHigh := rxbuf[crcEndIndex]  // C_high (例如 0x8B)
+		sentLow := rxbuf[crcEndIndex+1] // C_low (例如 0xB0)
+
+		// 由于 isEqual 期望 (low, high)，我们需要将 sentLow 传给 low
+
+		// fmt.Printf("ddd: % X\n", rxbuf)
+		// fmt.Println("c.crc: ", crc.crc)
+		// fmt.Println("sentLow: ", sentLow, "sentHigh: ", sentHigh)
+		// fmt.Println("rxbuf[0:10]: ", rxbuf[0:10], "rxbuf[crcEndIndex-10:crcEndIndex]: ", rxbuf[crcEndIndex-10:crcEndIndex])
+
+		// fmt.Println("len: ", len(rxbuf[crcEndIndex-10:crcEndIndex]))
+
+		if !crc.isEqual(sentHigh, sentLow) {
+			err = ErrBadCRC
+			// fmt.Println("crc: ", sentLow, sentHigh, "byte needed: ", bytesNeeded)
+			return
+		}
+
+		// 8. 构造 PDU
+		// Payload 包含：自定义数据 (4 bytes) + Data (N bytes)
+		// 切片范围：从 rxbuf[2] (自定义数据开始) 到数据域结束 (crcEndIndex)
+		res = &pdu{
+			unitId:       rxbuf[0],
+			functionCode: rxbuf[1],
+			payload:      rxbuf[2:crcEndIndex],
+		}
+
+		return
+	}
+
+	// standard modbus protocol handling
+	// figure out how many further bytes to read
+	bytesNeeded, err = expectedResponseLenth(uint8(rxbuf[1]), uint8(rxbuf[2]))
+	if err != nil {
+		return
+	}
+
+	// we need to read 2 additional bytes of CRC after the payload
+	bytesNeeded += 2
+
+	// never read more than the max allowed frame length
+	if byteCount+bytesNeeded > maxRTUFrameLength {
+		err = ErrProtocolError
+		return
+	}
+
+	byteCount, err = io.ReadFull(rt.link, rxbuf[3:3+bytesNeeded])
+	if err != nil && err != io.ErrUnexpectedEOF {
+		return
+	}
+	if byteCount != bytesNeeded {
+		rt.logger.Warningf("expected %v bytes, received %v", bytesNeeded, byteCount)
+		err = ErrShortFrame
+		return
+	}
+
+	// compute the CRC on the entire frame, excluding the CRC
+	crc.init()
+	crc.add(rxbuf[0 : 3+bytesNeeded-2])
+
+	// compare CRC values
+	if !crc.isEqual(rxbuf[3+bytesNeeded-2], rxbuf[3+bytesNeeded-1]) {
+		err = ErrBadCRC
+		return
+	}
+
+	res = &pdu{
+		unitId:       rxbuf[0],
+		functionCode: rxbuf[1],
+		// pass the byte count + trailing data as payload, withtout the CRC
+		payload: rxbuf[2 : 3+bytesNeeded-2],
+	}
+
+	return
+}
+
+func (rt *rtuTransport) readRTUFrameWithRes() (res *pdu, err error) {
+	var rxbuf []byte
+	var byteCount int
+	var bytesNeeded int
+	var crc crc
+
+	rxbuf = make([]byte, 4096)
+
 	// read the serial ADU header: unit id (1 byte), function code (1 byte) and
 	// PDU length/exception code (1 byte)
 	byteCount, err = io.ReadFull(rt.link, rxbuf[0:3])
@@ -163,12 +437,12 @@ func (rt *rtuTransport) readRTUFrame() (res *pdu, err error) {
 	bytesNeeded += 2
 
 	// never read more than the max allowed frame length
-	if byteCount + bytesNeeded > maxRTUFrameLength {
+	if byteCount+bytesNeeded > maxRTUFrameLength {
 		err = ErrProtocolError
 		return
 	}
 
-	byteCount, err	= io.ReadFull(rt.link, rxbuf[3:3 + bytesNeeded])
+	byteCount, err = io.ReadFull(rt.link, rxbuf[3:3+bytesNeeded])
 	if err != nil && err != io.ErrUnexpectedEOF {
 		return
 	}
@@ -180,19 +454,88 @@ func (rt *rtuTransport) readRTUFrame() (res *pdu, err error) {
 
 	// compute the CRC on the entire frame, excluding the CRC
 	crc.init()
-	crc.add(rxbuf[0:3 + bytesNeeded - 2])
+	crc.add(rxbuf[0 : 3+bytesNeeded-2])
 
 	// compare CRC values
-	if !crc.isEqual(rxbuf[3 + bytesNeeded - 2], rxbuf[3 + bytesNeeded - 1]) {
+	if !crc.isEqual(rxbuf[3+bytesNeeded-2], rxbuf[3+bytesNeeded-1]) {
 		err = ErrBadCRC
 		return
 	}
 
+	// 标准modbus响应已读取完成，现在读取自定义数据
+	// 设置5秒超时来读取自定义数据
+	customDataTimeout := 5 * time.Second
+	deadline := time.Now().Add(customDataTimeout)
+	err = rt.link.SetDeadline(deadline)
+	if err != nil {
+		return
+	}
+
+	// 使用临时缓冲区循环读取自定义数据
+	tempBuf := make([]byte, 256) // 每次读取最多256字节
+	totalRead := 0
+	startPos := 3 + bytesNeeded
+	var lastErr error // 记录最后一次非超时错误
+
+	for {
+		// 检查是否已经超时
+		if time.Now().After(deadline) {
+			// 超时时间到，退出循环
+			// 如果有之前记录的错误，使用它；否则err保持为nil（超时是正常的）
+			if lastErr != nil {
+				err = lastErr
+			}
+			break
+		}
+
+		// 检查缓冲区是否还有空间
+		if startPos+totalRead+len(tempBuf) > len(rxbuf) {
+			// 如果缓冲区不够，扩展它
+			newBuf := make([]byte, len(rxbuf)*2)
+			copy(newBuf, rxbuf)
+			rxbuf = newBuf
+		}
+
+		// 尝试读取数据
+		n, readErr := rt.link.Read(tempBuf)
+		if n > 0 {
+			// 将读取的数据复制到rxbuf
+			copy(rxbuf[startPos+totalRead:startPos+totalRead+n], tempBuf[:n])
+			totalRead += n
+		}
+
+		// 如果遇到超时错误，说明超时时间到了，退出循环
+		if readErr != nil {
+			if os.IsTimeout(readErr) {
+				// 超时时间到，退出循环
+				// 如果有之前记录的错误，使用它；否则err保持为nil（超时是正常的）
+				if lastErr != nil {
+					err = lastErr
+				}
+				break
+			}
+			// 记录非超时错误，但继续等待直到超时
+			lastErr = readErr
+			// 继续循环，等待超时
+		}
+
+	}
+
+	// 标准响应的payload在 rxbuf[2:3+bytesNeeded-2] 位置
+	standardPayloadStart := 2
+	standardPayloadEnd := 3 + bytesNeeded - 2
+
+	// 构建完整的payload：标准响应payload + 自定义数据
+	completePayload := make([]byte, 0, standardPayloadEnd-standardPayloadStart+totalRead)
+	completePayload = append(completePayload, rxbuf[standardPayloadStart:standardPayloadEnd]...)
+	if totalRead > 0 {
+		completePayload = append(completePayload, rxbuf[startPos:startPos+totalRead]...)
+	}
+
 	res = &pdu{
 		unitId:       rxbuf[0],
 		functionCode: rxbuf[1],
-		// pass the byte count + trailing data as payload, withtout the CRC
-		payload:	rxbuf[2:3 + bytesNeeded  - 2],
+		payload:      completePayload,
 	}
 
 	return
@@ -222,12 +565,16 @@ func expectedResponseLenth(responseCode uint8, responseLength uint8) (byteCount
 	case fcReadHoldingRegisters,
 		fcReadInputRegisters,
 		fcReadCoils,
-	     fcReadDiscreteInputs:            byteCount = int(responseLength)
+		fcReadDiscreteInputs,
+		0x41:
+		byteCount = int(responseLength)
 	case fcWriteSingleRegister,
 		fcWriteMultipleRegisters,
 		fcWriteSingleCoil,
-	     fcWriteMultipleCoils:            byteCount = 3
-	case fcMaskWriteRegister:             byteCount = 5
+		fcWriteMultipleCoils:
+		byteCount = 3
+	case fcMaskWriteRegister:
+		byteCount = 5
 	case fcReadHoldingRegisters | 0x80,
 		fcReadInputRegisters | 0x80,
 		fcReadCoils | 0x80,
@@ -236,8 +583,11 @@ func expectedResponseLenth(responseCode uint8, responseLength uint8) (byteCount
 		fcWriteMultipleRegisters | 0x80,
 		fcWriteSingleCoil | 0x80,
 		fcWriteMultipleCoils | 0x80,
-	     fcMaskWriteRegister | 0x80:      byteCount = 0
-	default: err = ErrProtocolError
+		fcMaskWriteRegister | 0x80,
+		0x41 | 0x80:
+		byteCount = 0
+	default:
+		err = ErrProtocolError
 	}
 
 	return

tcp_transport.go

@@ -59,6 +59,10 @@ func (tt *tcpTransport) ExecuteRequest(req *pdu) (res *pdu, err error) {
 	return
 }
 
+func (tt *tcpTransport) ExecuteRequestWithRes(req *pdu) (res *pdu, err error) {
+	return nil, nil
+}
+
 // Reads a request from the socket.
 func (tt *tcpTransport) ReadRequest() (req *pdu, err error) {
 	var txnId uint16
@@ -111,7 +115,7 @@ func (tt *tcpTransport) readResponse() (res *pdu, err error) {
 
 		// ignore unknown transaction identifiers
 		if tt.lastTxnId != txnId {
-			tt.logger.Warningf("received unexpected transaction id " +
+			tt.logger.Warningf("received unexpected transaction id "+
 				"(expected 0x%04x, received 0x%04x)",
 				tt.lastTxnId, txnId)
 			continue
@@ -151,7 +155,7 @@ func (tt *tcpTransport) readMBAPFrame() (p *pdu, txnId uint16, err error) {
 	bytesNeeded--
 
 	// never read more than the max allowed frame length
-	if bytesNeeded + mbapHeaderLength > maxTCPFrameLength {
+	if bytesNeeded+mbapHeaderLength > maxTCPFrameLength {
 		err = ErrProtocolError
 		return
 	}
@@ -193,7 +197,7 @@ func (tt *tcpTransport) assembleMBAPFrame(txnId uint16, p *pdu) (payload []byte)
 	// protocol identifier (always 0x0000)
 	payload = append(payload, 0x00, 0x00)
 	// length (covers unit identifier + function code + payload fields)
-	payload = append(payload, uint16ToBytes(BIG_ENDIAN, uint16(2 + len(p.payload)))...)
+	payload = append(payload, uint16ToBytes(BIG_ENDIAN, uint16(2+len(p.payload)))...)
 	// unit identifier
 	payload = append(payload, p.unitId)
 	// function code

transport.go

@@ -1,6 +1,7 @@
 package modbus
 
 type transportType uint
+
 const (
 	modbusRTU        transportType = 1
 	modbusRTUOverTCP transportType = 2
@@ -11,8 +12,9 @@ const (
 )
 
 type transport interface {
-	Close()              (error)
+	Close() error
 	ExecuteRequest(*pdu) (*pdu, error)
+	ExecuteRequestWithRes(*pdu) (*pdu, error)
 	ReadRequest() (*pdu, error)
-	WriteResponse(*pdu)  (error)
+	WriteResponse(*pdu) error
 }