package modbus

import (
	"fmt"
	"io"
	"log"
	"os"
	"time"
)

const (
	maxRTUFrameLength int = 256
)

type rtuTransport struct {
	logger       *logger
	link         rtuLink
	timeout      time.Duration
	lastActivity time.Time
	t35          time.Duration
	t1           time.Duration
}

type rtuLink interface {
	Close() error
	Read([]byte) (int, error)
	Write([]byte) (int, error)
	SetDeadline(time.Time) error
}

// Returns a new RTU transport.
func newRTUTransport(link rtuLink, addr string, speed uint, timeout time.Duration, customLogger *log.Logger) (rt *rtuTransport) {
	rt = &rtuTransport{
		logger:  newLogger(fmt.Sprintf("rtu-transport(%s)", addr), customLogger),
		link:    link,
		timeout: timeout,
		t1:      serialCharTime(speed),
	}

	if speed >= 19200 {
		// for baud rates equal to or greater than 19200 bauds, a fixed value of
		// 1750 uS is specified for t3.5.
		rt.t35 = 1750 * time.Microsecond
	} else {
		// for lower baud rates, the inter-frame delay should be 3.5 character times
		rt.t35 = (serialCharTime(speed) * 35) / 10
	}

	return
}

// Closes the rtu link.
func (rt *rtuTransport) Close() (err error) {
	err = rt.link.Close()

	return
}

// Runs a request across the rtu link and returns a response.
func (rt *rtuTransport) ExecuteRequest(req *pdu) (res *pdu, err error) {
	var ts time.Time
	var t time.Duration
	var n int

	// set an i/o deadline on the link
	err = rt.link.SetDeadline(time.Now().Add(rt.timeout))
	if err != nil {
		return
	}

	// if the line was active less than 3.5 char times ago,
	// let t3.5 expire before transmitting
	t = time.Since(rt.lastActivity.Add(rt.t35))
	if t < 0 {
		time.Sleep(t * (-1))
	}

	ts = time.Now()

	// build an RTU ADU out of the request object and
	// send the final ADU+CRC on the wire
	n, err = rt.link.Write(rt.assembleRTUFrame(req))
	fmt.Printf("send: %X\n", rt.assembleRTUFrame(req))
	if err != nil {
		fmt.Printf("write error: %s", err.Error())
		return
	}

	// estimate how long the serial line was busy for.
	// note that on most platforms, Write() will be buffered and return
	// immediately rather than block until the buffer is drained
	rt.lastActivity = ts.Add(time.Duration(n) * rt.t1)

	// observe inter-frame delays
	time.Sleep(rt.lastActivity.Add(rt.t35).Sub(time.Now()))

	// read the response back from the wire
	res, err = rt.readRTUFrame()

	if err == ErrBadCRC || err == ErrProtocolError || err == ErrShortFrame {
		// wait for and flush any data coming off the link to allow
		// devices to re-sync
		time.Sleep(time.Duration(maxRTUFrameLength) * rt.t1)
		discard(rt.link)
	}

	// mark the time if we heard anything back
	if err != ErrRequestTimedOut {
		rt.lastActivity = time.Now()
	}

	return
}

func (rt *rtuTransport) ExecuteRequestWithRes(req *pdu) (res *pdu, err error) {
	var ts time.Time
	var t time.Duration
	var n int

	// set an i/o deadline on the link
	err = rt.link.SetDeadline(time.Now().Add(rt.timeout))
	if err != nil {
		return
	}

	// if the line was active less than 3.5 char times ago,
	// let t3.5 expire before transmitting
	t = time.Since(rt.lastActivity.Add(rt.t35))
	if t < 0 {
		time.Sleep(t * (-1))
	}

	ts = time.Now()

	// build an RTU ADU out of the request object and
	// send the final ADU+CRC on the wire
	n, err = rt.link.Write(rt.assembleRTUFrame(req))
	if err != nil {
		return
	}

	// estimate how long the serial line was busy for.
	// note that on most platforms, Write() will be buffered and return
	// immediately rather than block until the buffer is drained
	rt.lastActivity = ts.Add(time.Duration(n) * rt.t1)

	// observe inter-frame delays
	time.Sleep(rt.lastActivity.Add(rt.t35).Sub(time.Now()))

	// read the response back from the wire
	res, err = rt.readRTUFrameWithRes()

	if err == ErrBadCRC || err == ErrProtocolError || err == ErrShortFrame {
		// wait for and flush any data coming off the link to allow
		// devices to re-sync
		time.Sleep(time.Duration(maxRTUFrameLength) * rt.t1)
		discard(rt.link)
	}

	// mark the time if we heard anything back
	if err != ErrRequestTimedOut {
		rt.lastActivity = time.Now()
	}

	return
}

// Reads a request from the rtu link.
func (rt *rtuTransport) ReadRequest() (req *pdu, err error) {
	// reading requests from RTU links is currently unsupported
	err = fmt.Errorf("unimplemented")

	return
}

// Writes a response to the rtu link.
func (rt *rtuTransport) WriteResponse(res *pdu) (err error) {
	var n int

	// build an RTU ADU out of the request object and
	// send the final ADU+CRC on the wire
	n, err = rt.link.Write(rt.assembleRTUFrame(res))
	if err != nil {
		return
	}

	rt.lastActivity = time.Now().Add(rt.t1 * time.Duration(n))

	return
}

// Waits for, reads and decodes a frame from the rtu link.
func (rt *rtuTransport) readRTUFrame() (res *pdu, err error) {
	var rxbuf []byte
	var byteCount int
	var bytesNeeded int
	var crc crc
	// var dataLength uint16

	rxbuf = make([]byte, maxRTUFrameLength)

	// read the serial ADU header: unit id (1 byte), function code (1 byte) and
	// PDU length/exception code (1 byte)
	byteCount, err = io.ReadFull(rt.link, rxbuf[0:3])
	if (byteCount > 0 || err == nil) && byteCount != 3 {
		err = ErrShortFrame
		return
	}
	if uint8(rxbuf[1]) == fcCustomize {
		fmt.Printf("receive: %v\n", rxbuf[0:3])
	}
	if err != nil && err != io.ErrUnexpectedEOF {
		return
	}

	// handle custom function code 0x41 with special format:
	// [单元ID] [功能码] [起始地址(2字节)] [字节数(2字节)] [数据...] [CRC]
	if uint8(rxbuf[1]) == fcCustomize {
		// 1. 读取剩余的自定义头部 (4 字节: rxbuf[2] 到 rxbuf[5])
		// 覆盖 rxbuf[2]（上一次读取的第三个字节）以及 rxbuf[3], rxbuf[4], rxbuf[5]
		byteCount, err = io.ReadFull(rt.link, rxbuf[3:6]) // <-- 关键修正：从索引 2 开始读取 4 字节

		// 修正短帧检查逻辑
		if err != nil {
			if err == io.EOF || err == io.ErrUnexpectedEOF {
				err = ErrShortFrame
			}
			return
		}
		// 此时 byteCount 应该总是 4。

		// 2. 提取数据长度 (关键修正点)
		// 数据长度位于 rxbuf[4] 和 rxbuf[5]
		dataLength := bytesToUint16(BIG_ENDIAN, rxbuf[4:6])
		bytesNeeded = int(dataLength)
		fmt.Println(bytesNeeded)

		// 3. 计算总共需要读取的字节数
		// 数据域长度 + 2 字节 CRC
		bytesToRead := bytesNeeded + 2

		// 4. 计算总帧大小: 6 (Header) + DataLength + 2 (CRC)
		totalFrameSize := 6 + bytesToRead
		TotalHeaderLength := 6

		// 5. 动态分配或调整缓冲区
		if totalFrameSize > maxRTUFrameLength {
			// save already read data
			header := make([]byte, 6)
			copy(header, rxbuf[0:TotalHeaderLength]) // 复制 rxbuf[0] 到 rxbuf[5]

			// resize buffer to accommodate larger frame
			rxbuf = make([]byte, totalFrameSize)

			// copy back the header
			copy(rxbuf[0:TotalHeaderLength], header)
		}

		// 6. 读取数据域和 CRC
		// 从 rxbuf[6] (TotalHeaderLength) 开始读取 DataLength + CRC (2 字节)
		readStartIdx := TotalHeaderLength // 6
		byteCount, err = io.ReadFull(rt.link, rxbuf[readStartIdx:totalFrameSize])

		if err != nil {
			if err == io.EOF || err == io.ErrUnexpectedEOF {
				err = ErrShortFrame
			}
			return
		}

		if byteCount != bytesToRead {
			rt.logger.Warningf("expected %v bytes, received %v", bytesToRead, byteCount)
			err = ErrShortFrame
			return
		}

		// 7. CRC 校验
		crcEndIndex := totalFrameSize - 2 // CRC 校验范围的结束索引 (不包含)
		fmt.Println("crc end index", crcEndIndex)

		crc.init()
		crc.add(rxbuf[0:crcEndIndex]) // 校验范围从 rxbuf[0] 到数据域结束

		// 比较接收到的 CRC
		// recvCRCLow := rxbuf[crcEndIndex]
		// recvCRCHigh := rxbuf[crcEndIndex+1]

		// fmt.Println("len: ", len(rxbuf[6:crcEndIndex]))

		// if !crc.isEqual(recvCRCLow, recvCRCHigh) {
		// 	err = ErrBadCRC
		// 	fmt.Println("crc: ", recvCRCLow, recvCRCHigh, "byte needed: ", bytesNeeded)
		// 	return
		// }

		// 8. 构造 PDU
		// Payload 包含：自定义数据 (4 bytes) + Data (N bytes)
		// 切片范围：从 rxbuf[2] (自定义数据开始) 到数据域结束 (crcEndIndex)
		res = &pdu{
			unitId:       rxbuf[0],
			functionCode: rxbuf[1],
			payload:      rxbuf[2:crcEndIndex],
		}

		return
	}

	// standard modbus protocol handling
	// figure out how many further bytes to read
	bytesNeeded, err = expectedResponseLenth(uint8(rxbuf[1]), uint8(rxbuf[2]))
	if err != nil {
		return
	}

	// we need to read 2 additional bytes of CRC after the payload
	bytesNeeded += 2

	// never read more than the max allowed frame length
	if byteCount+bytesNeeded > maxRTUFrameLength {
		err = ErrProtocolError
		return
	}

	byteCount, err = io.ReadFull(rt.link, rxbuf[3:3+bytesNeeded])
	if err != nil && err != io.ErrUnexpectedEOF {
		return
	}
	if byteCount != bytesNeeded {
		rt.logger.Warningf("expected %v bytes, received %v", bytesNeeded, byteCount)
		err = ErrShortFrame
		return
	}

	// compute the CRC on the entire frame, excluding the CRC
	crc.init()
	crc.add(rxbuf[0 : 3+bytesNeeded-2])

	// compare CRC values
	if !crc.isEqual(rxbuf[3+bytesNeeded-2], rxbuf[3+bytesNeeded-1]) {
		err = ErrBadCRC
		return
	}

	res = &pdu{
		unitId:       rxbuf[0],
		functionCode: rxbuf[1],
		// pass the byte count + trailing data as payload, withtout the CRC
		payload: rxbuf[2 : 3+bytesNeeded-2],
	}

	return
}

func (rt *rtuTransport) readRTUFrameWithRes() (res *pdu, err error) {
	var rxbuf []byte
	var byteCount int
	var bytesNeeded int
	var crc crc

	rxbuf = make([]byte, 4096)

	// read the serial ADU header: unit id (1 byte), function code (1 byte) and
	// PDU length/exception code (1 byte)
	byteCount, err = io.ReadFull(rt.link, rxbuf[0:3])
	if (byteCount > 0 || err == nil) && byteCount != 3 {
		err = ErrShortFrame
		return
	}
	if err != nil && err != io.ErrUnexpectedEOF {
		return
	}

	// figure out how many further bytes to read
	bytesNeeded, err = expectedResponseLenth(uint8(rxbuf[1]), uint8(rxbuf[2]))
	if err != nil {
		return
	}

	// we need to read 2 additional bytes of CRC after the payload
	bytesNeeded += 2

	// never read more than the max allowed frame length
	if byteCount+bytesNeeded > maxRTUFrameLength {
		err = ErrProtocolError
		return
	}

	byteCount, err = io.ReadFull(rt.link, rxbuf[3:3+bytesNeeded])
	if err != nil && err != io.ErrUnexpectedEOF {
		return
	}
	if byteCount != bytesNeeded {
		rt.logger.Warningf("expected %v bytes, received %v", bytesNeeded, byteCount)
		err = ErrShortFrame
		return
	}

	// compute the CRC on the entire frame, excluding the CRC
	crc.init()
	crc.add(rxbuf[0 : 3+bytesNeeded-2])

	// compare CRC values
	if !crc.isEqual(rxbuf[3+bytesNeeded-2], rxbuf[3+bytesNeeded-1]) {
		err = ErrBadCRC
		return
	}

	// 标准modbus响应已读取完成，现在读取自定义数据
	// 设置5秒超时来读取自定义数据
	customDataTimeout := 5 * time.Second
	err = rt.link.SetDeadline(time.Now().Add(customDataTimeout))
	if err != nil {
		return
	}

	// 使用临时缓冲区循环读取自定义数据
	tempBuf := make([]byte, 256) // 每次读取最多256字节
	totalRead := 0
	startPos := 3 + bytesNeeded

	for {
		// 检查缓冲区是否还有空间
		if startPos+totalRead+len(tempBuf) > len(rxbuf) {
			// 如果缓冲区不够，扩展它
			newBuf := make([]byte, len(rxbuf)*2)
			copy(newBuf, rxbuf)
			rxbuf = newBuf
		}

		// 尝试读取数据
		n, readErr := rt.link.Read(tempBuf)
		if n > 0 {
			// 将读取的数据复制到rxbuf
			copy(rxbuf[startPos+totalRead:startPos+totalRead+n], tempBuf[:n])
			totalRead += n
		}

		// 如果遇到超时错误，说明没有更多数据了
		if readErr != nil {
			if os.IsTimeout(readErr) {
				// 超时是正常的，说明自定义数据读取完成
				break
			}
			// 其他错误需要检查是否是EOF（数据读取完成）
			if readErr == io.EOF {
				break
			}
			// 对于其他错误，如果已经读取了一些数据，继续处理
			if totalRead == 0 {
				err = readErr
				return
			}
			break
		}

		// 如果读取的字节数少于请求的，说明没有更多数据了
		if n < len(tempBuf) {
			break
		}
	}

	// 返回标准响应的payload（地址+值，4字节）+ 自定义数据
	// 标准响应的payload在 rxbuf[2:3+bytesNeeded-2] 位置
	standardPayloadStart := 2
	standardPayloadEnd := 3 + bytesNeeded - 2

	// 构建完整的payload：标准响应payload + 自定义数据
	completePayload := make([]byte, 0, standardPayloadEnd-standardPayloadStart+totalRead)
	completePayload = append(completePayload, rxbuf[standardPayloadStart:standardPayloadEnd]...)
	if totalRead > 0 {
		completePayload = append(completePayload, rxbuf[startPos:startPos+totalRead]...)
	}

	res = &pdu{
		unitId:       rxbuf[0],
		functionCode: rxbuf[1],
		// payload包含标准响应的payload + 自定义数据
		payload: completePayload,
	}

	return
}

// Turns a PDU object into bytes.
func (rt *rtuTransport) assembleRTUFrame(p *pdu) (adu []byte) {
	var crc crc

	adu = append(adu, p.unitId)
	adu = append(adu, p.functionCode)
	adu = append(adu, p.payload...)

	// run the ADU through the CRC generator
	crc.init()
	crc.add(adu)

	// append the CRC to the ADU
	adu = append(adu, crc.value()...)

	return
}

// Computes the expected length of a modbus RTU response.
func expectedResponseLenth(responseCode uint8, responseLength uint8) (byteCount int, err error) {
	switch responseCode {
	case fcReadHoldingRegisters,
		fcReadInputRegisters,
		fcReadCoils,
		fcReadDiscreteInputs,
		0x41:
		byteCount = int(responseLength)
	case fcWriteSingleRegister,
		fcWriteMultipleRegisters,
		fcWriteSingleCoil,
		fcWriteMultipleCoils:
		byteCount = 3
	case fcMaskWriteRegister:
		byteCount = 5
	case fcReadHoldingRegisters | 0x80,
		fcReadInputRegisters | 0x80,
		fcReadCoils | 0x80,
		fcReadDiscreteInputs | 0x80,
		fcWriteSingleRegister | 0x80,
		fcWriteMultipleRegisters | 0x80,
		fcWriteSingleCoil | 0x80,
		fcWriteMultipleCoils | 0x80,
		fcMaskWriteRegister | 0x80,
		0x41 | 0x80:
		byteCount = 0
	default:
		err = ErrProtocolError
	}

	return
}

// Discards the contents of the link's rx buffer, eating up to 1kB of data.
// Note that on a serial line, this call may block for up to serialConf.Timeout
// i.e. 10ms.
func discard(link rtuLink) {
	var rxbuf = make([]byte, 1024)

	link.SetDeadline(time.Now().Add(500 * time.Microsecond))
	io.ReadFull(link, rxbuf)

	return
}

// Returns how long it takes to send 1 byte on a serial line at the
// specified baud rate.
func serialCharTime(rate_bps uint) (ct time.Duration) {
	// note: an RTU byte on the wire is:
	// - 1 start bit,
	// - 8 data bits,
	// - 1 parity or stop bit
	// - 1 stop bit
	ct = (11) * time.Second / time.Duration(rate_bps)

	return
}