自定义读取接口&自定义写入接口

Reviewed-on: #4

client.go

@@ -793,7 +793,7 @@ func (mc *ModbusClient) WriteRegisterWithRes(addr uint16, value uint16) (bytes [
 	req.payload = append(req.payload, uint16ToBytes(mc.endianness, value)...)
 
 	// run the request across the transport and wait for a response
-	res, err = mc.executeRequest(req)
+	res, err = mc.executeRequestWithRes(req)
 	if err != nil {
 		return
 	}
@@ -1188,15 +1188,9 @@ func (mc *ModbusClient) readRegistersWithFunctionCode(addr uint16, quantity uint
 		unitId: mc.unitId,
 	}
 
-	// if functionCode != fcCustomize {
-	// 	err = ErrUnexpectedParameters
-	// 	mc.logger.Errorf("unexpected function code (%d)", functionCode)
-	// 	return
-	// }
-
-	if functionCode == 0 {
+	if functionCode != fcCustomize {
 		err = ErrUnexpectedParameters
-		mc.logger.Errorf("unexpected register type (%v)", functionCode)
+		mc.logger.Errorf("unexpected function code (%d)", functionCode)
 		return
 	}
 
@@ -1208,9 +1202,10 @@ func (mc *ModbusClient) readRegistersWithFunctionCode(addr uint16, quantity uint
 		return
 	}
 
-	if quantity > 1024 {
+	// 16 * 16 * 40
+	if quantity > 10240 {
 		err = ErrUnexpectedParameters
-		mc.logger.Error("quantity of registers exceeds 1024")
+		mc.logger.Error("quantity of registers exceeds 10240")
 		return
 	}
 
@@ -1406,3 +1401,29 @@ func (mc *ModbusClient) executeRequest(req *pdu) (res *pdu, err error) {
 
 	return
 }
+
+func (mc *ModbusClient) executeRequestWithRes(req *pdu) (res *pdu, err error) {
+	// send the request over the wire, wait for and decode the response
+	res, err = mc.transport.ExecuteRequestWithRes(req)
+	if err != nil {
+		// map i/o timeouts to ErrRequestTimedOut
+		if os.IsTimeout(err) {
+			err = ErrRequestTimedOut
+		}
+		return
+	}
+
+	// make sure the source unit id matches that of the request
+	if (res.functionCode&0x80) == 0x00 && res.unitId != req.unitId {
+		err = ErrBadUnitId
+		return
+	}
+	// accept errors from gateway devices (using special unit id #255)
+	if (res.functionCode&0x80) == 0x80 &&
+		(res.unitId != req.unitId && res.unitId != 0xff) {
+		err = ErrBadUnitId
+		return
+	}
+
+	return
+}

modbus.go

@@ -41,7 +41,7 @@ const (
 	fcWriteFileRecord uint8 = 0x15
 
 	// customize
-	fcCustomize uint8 = 0x29
+	fcCustomize uint8 = 0x41
 
 	// exception codes
 	exIllegalFunction         uint8 = 0x01

rtu_transport.go

@@ -21,10 +21,10 @@ type rtuTransport struct {
 }
 
 type rtuLink interface {
-	Close()		(error)
+	Close() error
 	Read([]byte) (int, error)
 	Write([]byte) (int, error)
-	SetDeadline(time.Time)	(error)
+	SetDeadline(time.Time) error
 }
 
 // Returns a new RTU transport.
@@ -109,6 +109,59 @@ func (rt *rtuTransport) ExecuteRequest(req *pdu) (res *pdu, err error) {
 	return
 }
 
+func (rt *rtuTransport) ExecuteRequestWithRes(req *pdu) (res *pdu, err error) {
+	var ts time.Time
+	var t time.Duration
+	var n int
+
+	// set an i/o deadline on the link
+	err = rt.link.SetDeadline(time.Now().Add(rt.timeout))
+	if err != nil {
+		return
+	}
+
+	// if the line was active less than 3.5 char times ago,
+	// let t3.5 expire before transmitting
+	t = time.Since(rt.lastActivity.Add(rt.t35))
+	if t < 0 {
+		time.Sleep(t * (-1))
+	}
+
+	ts = time.Now()
+
+	// build an RTU ADU out of the request object and
+	// send the final ADU+CRC on the wire
+	n, err = rt.link.Write(rt.assembleRTUFrame(req))
+	if err != nil {
+		return
+	}
+
+	// estimate how long the serial line was busy for.
+	// note that on most platforms, Write() will be buffered and return
+	// immediately rather than block until the buffer is drained
+	rt.lastActivity = ts.Add(time.Duration(n) * rt.t1)
+
+	// observe inter-frame delays
+	time.Sleep(rt.lastActivity.Add(rt.t35).Sub(time.Now()))
+
+	// read the response back from the wire
+	res, err = rt.readRTUFrameWithRes()
+
+	if err == ErrBadCRC || err == ErrProtocolError || err == ErrShortFrame {
+		// wait for and flush any data coming off the link to allow
+		// devices to re-sync
+		time.Sleep(time.Duration(maxRTUFrameLength) * rt.t1)
+		discard(rt.link)
+	}
+
+	// mark the time if we heard anything back
+	if err != ErrRequestTimedOut {
+		rt.lastActivity = time.Now()
+	}
+
+	return
+}
+
 // Reads a request from the rtu link.
 func (rt *rtuTransport) ReadRequest() (req *pdu, err error) {
 	// reading requests from RTU links is currently unsupported
@@ -163,12 +216,12 @@ func (rt *rtuTransport) readRTUFrame() (res *pdu, err error) {
 	bytesNeeded += 2
 
 	// never read more than the max allowed frame length
-	if byteCount + bytesNeeded > maxRTUFrameLength {
+	if byteCount+bytesNeeded > maxRTUFrameLength {
 		err = ErrProtocolError
 		return
 	}
 
-	byteCount, err	= io.ReadFull(rt.link, rxbuf[3:3 + bytesNeeded])
+	byteCount, err = io.ReadFull(rt.link, rxbuf[3:3+bytesNeeded])
 	if err != nil && err != io.ErrUnexpectedEOF {
 		return
 	}
@@ -180,10 +233,10 @@ func (rt *rtuTransport) readRTUFrame() (res *pdu, err error) {
 
 	// compute the CRC on the entire frame, excluding the CRC
 	crc.init()
-	crc.add(rxbuf[0:3 + bytesNeeded - 2])
+	crc.add(rxbuf[0 : 3+bytesNeeded-2])
 
 	// compare CRC values
-	if !crc.isEqual(rxbuf[3 + bytesNeeded - 2], rxbuf[3 + bytesNeeded - 1]) {
+	if !crc.isEqual(rxbuf[3+bytesNeeded-2], rxbuf[3+bytesNeeded-1]) {
 		err = ErrBadCRC
 		return
 	}
@@ -192,7 +245,76 @@ func (rt *rtuTransport) readRTUFrame() (res *pdu, err error) {
 		unitId:       rxbuf[0],
 		functionCode: rxbuf[1],
 		// pass the byte count + trailing data as payload, withtout the CRC
-		payload:	rxbuf[2:3 + bytesNeeded  - 2],
+		payload: rxbuf[2 : 3+bytesNeeded-2],
+	}
+
+	return
+}
+
+func (rt *rtuTransport) readRTUFrameWithRes() (res *pdu, err error) {
+	var rxbuf []byte
+	var byteCount int
+	var bytesNeeded int
+	var crc crc
+
+	rxbuf = make([]byte, 4096)
+
+	// read the serial ADU header: unit id (1 byte), function code (1 byte) and
+	// PDU length/exception code (1 byte)
+	byteCount, err = io.ReadFull(rt.link, rxbuf[0:3])
+	if (byteCount > 0 || err == nil) && byteCount != 3 {
+		err = ErrShortFrame
+		return
+	}
+	if err != nil && err != io.ErrUnexpectedEOF {
+		return
+	}
+
+	// figure out how many further bytes to read
+	bytesNeeded, err = expectedResponseLenth(uint8(rxbuf[1]), uint8(rxbuf[2]))
+	if err != nil {
+		return
+	}
+
+	// we need to read 2 additional bytes of CRC after the payload
+	bytesNeeded += 2
+
+	// never read more than the max allowed frame length
+	if byteCount+bytesNeeded > maxRTUFrameLength {
+		err = ErrProtocolError
+		return
+	}
+
+	byteCount, err = io.ReadFull(rt.link, rxbuf[3:3+bytesNeeded])
+	if err != nil && err != io.ErrUnexpectedEOF {
+		return
+	}
+	if byteCount != bytesNeeded {
+		rt.logger.Warningf("expected %v bytes, received %v", bytesNeeded, byteCount)
+		err = ErrShortFrame
+		return
+	}
+
+	// compute the CRC on the entire frame, excluding the CRC
+	crc.init()
+	crc.add(rxbuf[0 : 3+bytesNeeded-2])
+
+	// compare CRC values
+	if !crc.isEqual(rxbuf[3+bytesNeeded-2], rxbuf[3+bytesNeeded-1]) {
+		err = ErrBadCRC
+		return
+	}
+
+	_, err = io.ReadFull(rt.link, rxbuf[3+bytesNeeded:])
+	if err != nil && err != io.ErrUnexpectedEOF {
+		return
+	}
+
+	res = &pdu{
+		unitId:       rxbuf[0],
+		functionCode: rxbuf[1],
+		// pass the byte count + trailing data as payload, withtout the CRC
+		payload: rxbuf[3+bytesNeeded:],
 	}
 
 	return
@@ -222,12 +344,16 @@ func expectedResponseLenth(responseCode uint8, responseLength uint8) (byteCount
 	case fcReadHoldingRegisters,
 		fcReadInputRegisters,
 		fcReadCoils,
-	     fcReadDiscreteInputs:            byteCount = int(responseLength)
+		fcReadDiscreteInputs,
+		0x41:
+		byteCount = int(responseLength)
 	case fcWriteSingleRegister,
 		fcWriteMultipleRegisters,
 		fcWriteSingleCoil,
-	     fcWriteMultipleCoils:            byteCount = 3
-	case fcMaskWriteRegister:             byteCount = 5
+		fcWriteMultipleCoils:
+		byteCount = 3
+	case fcMaskWriteRegister:
+		byteCount = 5
 	case fcReadHoldingRegisters | 0x80,
 		fcReadInputRegisters | 0x80,
 		fcReadCoils | 0x80,
@@ -236,8 +362,11 @@ func expectedResponseLenth(responseCode uint8, responseLength uint8) (byteCount
 		fcWriteMultipleRegisters | 0x80,
 		fcWriteSingleCoil | 0x80,
 		fcWriteMultipleCoils | 0x80,
-	     fcMaskWriteRegister | 0x80:      byteCount = 0
-	default: err = ErrProtocolError
+		fcMaskWriteRegister | 0x80,
+		0x41 | 0x80:
+		byteCount = 0
+	default:
+		err = ErrProtocolError
 	}
 
 	return

tcp_transport.go

@@ -59,6 +59,10 @@ func (tt *tcpTransport) ExecuteRequest(req *pdu) (res *pdu, err error) {
 	return
 }
 
+func (tt *tcpTransport) ExecuteRequestWithRes(req *pdu) (res *pdu, err error) {
+	return nil, nil
+}
+
 // Reads a request from the socket.
 func (tt *tcpTransport) ReadRequest() (req *pdu, err error) {
 	var txnId uint16
@@ -111,7 +115,7 @@ func (tt *tcpTransport) readResponse() (res *pdu, err error) {
 
 		// ignore unknown transaction identifiers
 		if tt.lastTxnId != txnId {
-			tt.logger.Warningf("received unexpected transaction id " +
+			tt.logger.Warningf("received unexpected transaction id "+
 				"(expected 0x%04x, received 0x%04x)",
 				tt.lastTxnId, txnId)
 			continue
@@ -151,7 +155,7 @@ func (tt *tcpTransport) readMBAPFrame() (p *pdu, txnId uint16, err error) {
 	bytesNeeded--
 
 	// never read more than the max allowed frame length
-	if bytesNeeded + mbapHeaderLength > maxTCPFrameLength {
+	if bytesNeeded+mbapHeaderLength > maxTCPFrameLength {
 		err = ErrProtocolError
 		return
 	}
@@ -193,7 +197,7 @@ func (tt *tcpTransport) assembleMBAPFrame(txnId uint16, p *pdu) (payload []byte)
 	// protocol identifier (always 0x0000)
 	payload = append(payload, 0x00, 0x00)
 	// length (covers unit identifier + function code + payload fields)
-	payload = append(payload, uint16ToBytes(BIG_ENDIAN, uint16(2 + len(p.payload)))...)
+	payload = append(payload, uint16ToBytes(BIG_ENDIAN, uint16(2+len(p.payload)))...)
 	// unit identifier
 	payload = append(payload, p.unitId)
 	// function code

transport.go

@@ -1,6 +1,7 @@
 package modbus
 
 type transportType uint
+
 const (
 	modbusRTU        transportType = 1
 	modbusRTUOverTCP transportType = 2
@@ -11,8 +12,9 @@ const (
 )
 
 type transport interface {
-	Close()              (error)
+	Close() error
 	ExecuteRequest(*pdu) (*pdu, error)
+	ExecuteRequestWithRes(*pdu) (*pdu, error)
 	ReadRequest() (*pdu, error)
-	WriteResponse(*pdu)  (error)
+	WriteResponse(*pdu) error
 }