#ifndef _PROTO_SECS2_H_
#define _PROTO_SECS2_H_

#include "main.h"
#include "proto_HSMS.h"

#define PROTO_SECS2_S1F3         (0x0103)        /*数据采集*/
#define PROTO_SECS2_S2F49        (0x0231)        /*设备状态远程控制*/
#define PROTO_SECS2_S1F1         (0x0101)        /*心跳*/
#define PROTO_SECS2_S6F11        (0x060B)        /*设备主动报警*/ 
#define PROTO_SECS2_S6F12        (0x060C)        /*确认报警*/     
#define PROTO_SECS2_S1F13        (0x010D)        /*建立连接*/
#define PROTO_SECS2_S2F31        (0x021F)        /*时间设置*/

/*报警和状态哦改变是否需要响应*/
#define PROTO_ALARM_CHANGE_RX_WAIT (1)
#define PROTO_STATE_CHANGE_RX_WAIT (1)

/*数据类型*/
#define PROTO_SECS2_DATA_TYPE_List         000/*八进制*/
#define PROTO_SECS2_DATA_TYPE_Binary       010
#define PROTO_SECS2_DATA_TYPE_Bool         011
#define PROTO_SECS2_DATA_TYPE_ASCII        020
#define PROTO_SECS2_DATA_TYPE_JIS_8        021
#define PROTO_SECS2_DATA_TYPE_2Byte_char   022
#define PROTO_SECS2_DATA_TYPE_8Byte_int    030
#define PROTO_SECS2_DATA_TYPE_1Byte_int    031
#define PROTO_SECS2_DATA_TYPE_2Byte_int    032
#define PROTO_SECS2_DATA_TYPE_4Byte_int    034
#define PROTO_SECS2_DATA_TYPE_8Byte_float  040
#define PROTO_SECS2_DATA_TYPE_4Byte_float  044
#define PROTO_SECS2_DATA_TYPE_8Byte_uint   050
#define PROTO_SECS2_DATA_TYPE_1Byte_uint   051
#define PROTO_SECS2_DATA_TYPE_2Byte_uint   052
#define PROTO_SECS2_DATA_TYPE_4Byte_uint   054


/*解析出来的消息数据*/
typedef struct
{
    void *pData;    /*解析的数据首地址*/
    u8 w_bit;       /*是否需要响应*/
    u8 DataType;    /*数据类型*/
    u8 ByteLen;     /*字节长度*/
    u8 DataNum;     /*数据个数*/
}proto_SECS2_MessageData_t;


typedef struct 
{
    u32 sys_count;
    void (*Rx_DataAnalysis)(proto_HSMS_Header_Data_t *,u8 *,u16);
    void (*Tx_Alarm_Task)(void);
    void (*Tx_Dev_State_Task)(void);
}proto_SECS2_t;


extern proto_SECS2_t SECS2;
#endif